Publications

2022-23
1

Miriyala, V., Patil, B. T., Shaikh, V. A., Sudhakar, D. S. S., and Deshmukh, S. (2023). Investigations of Surface Roughness and Temperatures in Vegetable Oil-based n-MQL Turning of AISI 4340 Steel. Journal of Engineering, Project, and Production Management, 14(1), 0003. DOI: 10.32738/JEPPM-2024-0003

2

Bhise, D. K., Patil, B. T., Shaikh, V. A., and Deshmukh, S. P. (2023). Comparative Economic Analysis and Investigation of Micro Lubrication Over Conventional Cooling in Manufacturing. Journal of Engineering, Project, and Production Management, 14(1), 0004. DOI: 10.32738/JEPPM-2024-0004

3

Dohale, V., Ambilkar, P., Gunasekaran, A., & Bilolikar, V. (2022). Examining the barriers to operationalization of humanitarian supply chains: lessons learned from COVID-19 crisis. Annals of Operations Research, 1-40. DOI: 1007/s10479-022-04752-x

4

Deshmukh Sujata, Patil Bhushan, Joshi Ketaki et al. (2022). A novel method for IOT based smart traffic system. Industrial Engineering Journal, Vol. XV Issue 06 11-16

5

Korgaonkar Saurabh (2022). Literature Review on Virtual Construct of Digital Twin, MCT RGIT's International Conference on Embracing 4.0 Technologies for Sustainable Growth (ICEI 4.0)

2021-22
1 Singh, Deepika S, Patil, B.T. and Joshi, K.N. (2021). Comparative Economic Analysis of Injection-Moulded Component with Conventional and Conformal Cooling Channels, Journal of The Institution of Engineers (India): Series C, 1-11. (Scopus Indexed) DOI: https://doi.org/10.1007/s40032-021-00778-5 
2 Joshi, K., & Patil, B.T. (2022). Automated inspection of spur gears using machine vision approach. International Journal of Computational Vision and Robotics (In press) (Scopus Indexed) DOI: https://doi.org/10.1504/IJCVR.2022.10044716
3 Subramanian, G., Patil, B.T. and Gardas, B.B. (2021). Evaluation of enablers of cloud technology to boost industry 4.0 adoption in the manufacturing micro, small and medium enterprises, Journal of Modelling in Management, Vol. 16 No. 3, pp. 944-962. (Scopus Indexed) DOI: https://doi.org/10.1108/JM2-08-2020-0207 
4 Arun Rane (2021). Value Stream Mapping and Process Simulation for Lean Manufacturing of Circuit Breaker Line. Advance Management Science, 10(1): 19-29
5 Saurabh K (2022), Literature Review on Virtual Construct of Digital Twin, MCT RGIT's International Conference on Embracing 4.0 Technologies for Sustainable Growth (ICEI 4.0)
6 MVB Rao, Bhushan Patil, Vasim Shaikh, DSS Sudhakar, Sujata Deshmukh (April 2022), " Investigation of Surface Roughness and Cutting Temperature Parameters in Turning AISI 4340 Steel using MQL, Mist Technique with Nano-Fluids (n-AL2O3, n- MOS2 and n-Graphene) mixed in Edible Vegetable Coconut Oils", MCT RGIT's International Conference on Embracing 4.0 Technologies for Sustainable Growth (ICEI 4.0)
7 Dipali bhise, Bhushan Patil, Vasim Shaikh, Sujata Deshmukh, (April 2022), "Comparative Economic Analysis and investigation of Micro Lubrication over Conventional Cooling in Manufacturing", MCT RGIT's International Conference on Embracing 4.0 Technologies for Sustainable Growth (ICEI 4.0)
8 Swarangi Kale, Ddhairya Gandhi, Aditya Raj, Yashas Joglekar, Dr. Bhushan Patil, "Injection moulding process parameters and defects: A Literature review", International Conference on embracing industry 4.0 technologies for sustainable growth (ICEI 4.0), Rajiv Gandhi Institute of Technology, Mumbai. 22nd April.
9 Khatu, R. D., Patil, B. T., Bhise, D. K., & Vaishnav, H. B. (2022). Design of a fixture for wire-cut EDM: A generic approach. Materials Today: Proceedings, 49, 2034-2041. (Scopus Indexed)
10 Advait C Purav, Deepika S Singraur and D S S Sudhakar (2021). Investigations into performance of conventional and conformal cooling channels of a plastic injection mold, IOP Conference Series Materials Science and Engineering 1070(1):012122 (Scopus Indexed)
11 S G Dubey, D S S Sudhakar and S Saha (2021), Airflow noise reduction in digital stethoscope add-on device, IOP Conf. Ser.: Mater. Sci. Eng. 1070 012109 (Scopus Indexed)
12 J. Beno, M. V. Rao, J. Beno and S. K. Das (2021). Process Control & Inspection using 5s Method and Computation with Pareto Analysis, 2021 International Conference on Advances in Computing, Communication, and Control (ICAC3), 2021, pp. 1-5, doi: 10.1109/ICAC353642.2021.9697131. 
13 Jerin Beno, M VeeraBhadra Rao and Sunil Kumar Das (2021). Studies and Practice of Geometrical Test Procedures & Reconditioning of CNC Lathe Machine Tool, 2021 J. Phys.: Conf. Ser. 2070 012228
14 A. Pinto and S. Fernandes (2021). EPT (Electrically Propelled Tricycle)," 2021 International Conference on Advances in Computing, Communication, and Control (ICAC3), 2021, pp. 1-7.
15 Dohale, V., Ambilkar, P., Gunasekaran, A., & Bilolikar, V. (2022). Examining the barriers to operationalization of humanitarian supply chains: lessons learned from COVID-19 crisis. Annals of Operations Research, 1-40.
 
2020-21
1 Joshi, K., & Patil, B. T. (2022). Multivariate statistical process monitoring and control of machining process using principal component-based Hotelling T2 charts: a machine vision approach. International Journal of Productivity and Quality Management, 35(1), 40-56. (Scopus Indexed) DOI: https://doi.org/10.1504/IJPQM.2020.10034309 
2 Arun Rane (2020). Low-cost CNC Machine by Using Microcontroller. Open Journal of Mechanical Engineering, 5(1): 01-04.
3 Arun Rane (2020). Simulation of A Manufacturing System to Improve Business. Advances In Industrial Engineering And Management, 9(2): 27-32.
4 Singraur, D. S., Patil, B. T., & Shaikh, V. A. (2021). Defect Minimization of an Injection Molded Plastic Component Using Conformal Cooling Channels. In Materials Science Forum (Vol. 1019, pp. 205-210). Trans Tech Publications Ltd. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1019.205 
5 Bhise, D. K., Patil, B. T., & Shaikh, V. A. (2021). Air Assisted Atomization Characterization of Biodegradable Fluid Using Microlubrication Technique. In Materials Science Forum (Vol. 1019, pp. 211-217). Trans Tech Publications Ltd. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1019.211 
6 Veerabhadrarao, M., Patil, B. T., Shaikh, V. A., & Sudhakar, D. S. S. (2021). Contribution of Factors such as Machining Parameters, MQL Nozzle Orientation (Angle & Distance) and MQL Nano-Fluid Type on Surface Finish of Turned Steel Work-Pieces Using DOE Approach. In Materials Science Forum (Vol. 1019, pp. 181- 193). Trans Tech Publications Ltd. DOI: https://doi.org/10.4028/www.scientific.net/MSF.1019.181 
7 Joshi, K., & Patil, B. (2020). Measurement of Spur Gear Parameters Using Machine Vision. In Proceedings of International Conference on Intelligent Manufacturing and Automation (pp. 31-37). Springer, Singapore. (Scopus Indexed)
8 Meera B. Kokate., Bhushan T. Patil, & Geetha Subramanian (2020). Machine Learning as a Smart Manufacturing Tool. In Proceedings of International Conference on Intelligent Manufacturing and Automation (pp. 359-366). Springer, Singapore. (Scopus Indexed)
9 Dabreo, P. W., Joshi, K. N., Patil, B. T., & Kokate, M. B. (2020, June). Machine vision based interferometry for measurement of flatness error in micro and nano manufacturing. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012066). IOP Publishing. DOI: 10.1088/1757-899X/872/1/012066 (Scopus Indexed)
10 Pashte, S., Wagle, K., Agrawal, S., Sudhakar, D.S.S., Patil, B. and Singraur, D.S., 2020, June. Simulation and optimization for a plastic component. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012072). DOI:10.1088/1757- 899X/872/1/012072 (Scopus Indexed)
11 Sikdar, H. N., Rao, M. V., Patil, B. T., Shaikh, V. A., & Sudhakar, D. S. S. (2020, June). Turned AISI 4340 Heat-Treated Steel Surface Quality Investigations in Dry and MQL Cooling Conditions. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012090). IOP Publishing. (Scopus Indexed)
12 Suryawanshi, A. T., Sudhakar, D. S. S., & Patil, B. T. (2020, June). Low cost and open source software-based CNC router for machining contours. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012084). IOP Publishing. (Scopus Indexed)
13 Bhopi, S. C., Miriyala, V. B. R., Parab, S. V., Haldankar, A. S., & Pandey, S. P. (2020, June). Study on rectification of issues faced by ultrasonic welding of medical “estethoscope” by adhesive bonding technique. In IOP Conference Series: Materials Science and Engineering (Vol. 872, No. 1, p. 012088). IOP Publishing. (Scopus Indexed)
14 Mehta, K. M., Pandey, S. K., & Shaikh, V. A. (2021). Unconventional Machining of ceramic matrix Composites–A review. Materials Today: Proceedings, 46, 7661-7669.
15 Bukane, S., Shaikh, V. A., & VeeraBhadraRao, M. (2020, December). Identifying optimization methods using MQL and Cryo-treatments for turning inconel alloy with nanofluids. In Journal of Physics: Conference Series (Vol. 1706, No. 1, p. 012219). IOP Publishing.
16 Shaikh, S., Shaikh, V. A., Rao, M. V., & Patil, B. T. (2021, February). A105 Work- Material Turning Experimentation using L9 Orthogonal Array Runs with Dry, MQL and Nano-Al2O3 Assisted MQL Machining Conditions. In IOP Conference Series: Materials Science and Engineering (Vol. 1070, No. 1, p. 012131). IOP Publishing.
17 Ambilkar, P., Dohale, V., Gunasekaran, A., & Bilolikar, V. (2021). Product returns management: a comprehensive review and future research agenda. International Journal of Production Research, 1-25. DOI: https://doi.org/10.1080/00207543.2021.1933645 
 
2019-20
1 Joshi K.N., Patil B. T.(2020), Performance Evaluation of Various Texture Analysis Techniques for Machine Vision based Characterization of Machined Surfaces, International Journal of Computational Vision and Robotics (IJCVR) (Inderscience Publications)(Scopus Indexed) DOI: https://doi.org/10.1504/IJCVR.2020.10029036 
2 Joshi K. N., Patil B. T., Vaishnav H. B., (2019) Multivariate Statistical Process Monitoring: A Perspective of Machine Vision, Udyog Pragati, NITIE 
3 Shaikh, V. A., and Boubekri, N., (2020), Using Vegetable-oil based Sustainable Metal Working Fluids to promote Green Manufacturing, International Journal of Manufacturing, Materials and Mechanical Engineering (IJMMME), Vol: 1, No. 1 ISSN: 2156-1680 (Scopus Indexed) DOI: https://doi.org/10.4018/IJMMME.2020010101 
4 Arun Bhiva Rane (2019). Enhancement of Productivity By Eliminating Back
Chipping. Open Journal of Mechanical Engineering, 4(2): 01-05.
5 Singh D. S., Patil B. T., Shaikh, V. A., (2020) “Plastic injection molded door
handle cooling time reduction investigation using conformal cooling channels.”, Materials Today: Proceedings. First International Conference on Recent Advances in Materials and Manufacturing ICRAMM, Sept 2019, Belagavi, 27, 519-523.
6 Bhise D. K., Patil B. T., Shaikh, V. A., (2020) “Investigating the Microlubrication Flow Inside The Nozzle using Computational Fluid Dynamics”, Materials Today: Proceedings. First International Conference on Recent Advances in Materials and Manufacturing ICRAMM, Sept 2019, Belagavi, India. Elsevier Publications, 27, 492-496.
7 Rao, M. V. B., Patil, B. T., Shaikh, V. A., Sudhakar, D. S. S.,  (2019) “Recent Studies of Al2O3, Graphene and MoS2 Nano-Materials in Metal Working Fluids for Turning Steel – A Review”, First International Conference on Recent Advances in Materials and Manufacturing ICRAMM, Sept 2019, Belagavi, India.
8 Kawade, P, Vaishnav, H. B., Joshi, K. N., (2019) “Finite Element Simulation of Milling Process with Cryogenic Precooling of Workpiece”, First International Conference on Recent Advances in Materials and Manufacturing ICRAMM, Sept 2019, Belagavi, India.
9 Deshmukh, S. P., Deshmukh, P. D., Patil, B. T., & Thampi, G. T. (2019). Exploring the factors to make e-commerce and m-commerce ubiquitous and pervasive to improve national productivity of India. International Journal of Productivity and Quality Management, 28(4), 457-496. DOI : https://doi.org/10.1504/IJPQM.2019.103691  (Scopus Indexed)
10 Joshi K. N. and Patil B. T., (2020). Prediction of Surface Roughness by Machine Vision using Principal Components based Regression Analysis. In International Conference on Computational Intelligence and Data Science (ICCIDS 2019),167, 382-391. Elsevier(Scopus indexed)
11 Joshi K.N., Patil B.T., Vaishnav H.B. (2020) Principal Components Based Multivariate Statistical Process Monitoring of Machining Process Using Machine Vision Approach. In: Patnaik S. (eds) New Paradigm of Industry 4.0. Studies in Big Data, vol 64. Springer, Cham (Springer Book Series) (Invited by Editor in Chief) DOI: https://doi.org/10.1007/978-3-030-25778-1_7 
 
2018-19
1 Joshi K. N., Patil B. T.(2018), Effect of Illumination Systems on Statistical Texture Parameters based Clustering and Discrimination of Machined Surfaces using Machine Vision, Mapan, Journal of Metrology Society of India pp 1-9 (by Springer Publications) (Scopus Indexed) DOI: https://doi.org/10.1007/s12647-018-0279-z 
2 Joshi K. N., Patil B. T., A Review of Machine Vision based Evaluation of Surface Roughness using Texture Analysis Techniques, Industrial Engineering Journal, Nov 2018, pp 22-27 (UGC Approved Journal as per UGC-Care List)
3 Singh S., Deepika,Patil B.T.(2019) Advancements in Design And Fabrication of Conformal Cooling Channels for Improvement in Plastic Injection Molding Process, Industrial Engineering Journal (2019), Volume 12 (5), doi: https://doi.org/10.26488/IEJ.12.5.1171  (UGC Approved Journal as per UGCCare List)
4 Veera Bhadra Rao, M., Shaikh, V. A., and Patil, B, T., (2018), Recent Trends in the Effective Utilization of Minimum Quantity Lubrication (MQL) in Turning Low Carbon Steels. Industrial Engineering Journal. Vol. 11 No. 2, pp. 29-33. ISSN: 2581- 4915 doi: https://doi.org/10.26488/IEJ.11.2.1042  (UGC Approved Journal as per UGC-Care List)
5 Bhise, Dipali., Patil, B, T., and Shaikh, V. A., (2019), Micro lubrication: A way to enhance the machining operation, Industrial Engineering Journal. Vol. 12 No. 4, ISSN: 2581-4915. doi: https://doi.org/10.26488/IEJ.12.4.1169  (UGC Approved Journal as per UGC-Care List)
6 Joshi, K.N. and Patil, B.T., (2019). A Perspective of Integrated Machine Vision Based-Multivariate Statistical Process Control. In Proceedings of International Conference on Intelligent Manufacturing and Automation (pp. 463-471). Springer, Singapore. doi: https://doi.org/10.1007/978-981-13-2490-1_42  (Springer Publications) (Scopus Indexed)
7 Joshi K., Patil B.T (2020) Evaluation of Surface Roughness by Machine Vision Using Neural Networks Approach. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore doi: https://doi.org/10.1007/978-981- 329971-9_3
8 Joshi K. N., Patil B. T., Recent Developments in Quality Inspection of Spur Gears using Machine Vision Technology, International Conference on Role of Industrial Engineering in Industry 4.0 Paradigm, organized by IIIE, Bhubaneshwar in association with SOA, (ICIEIND– 2018) (Received Best Paper Award)
9 Joshi K.N., Patil B. T., (2018) Machine Vision based Multivariate Statistical Process Monitoring: An Efficient Tool for Quality Control and Management, 3rd National Conference on Industrial Engineering and Technology Management, NCIETM 2018, NITIE (Further published in Udyog Pragati) (Received Best Paper Award)
10 VeeraBhadraRao M., Patil B.T., Shaikh V.A., Sudhakar D.S.S. (2020) Experimental Performance Evaluation of Mist Cooling Using Biodegradable Coconut Oil in Turning of EN24 Steel in Minimization of Tool Wear, Surface Roughness, and Chip Thickness. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore doi: https://doi.org/10.1007/978-981-32-99719_1 
11 Rao M.V.B., Patil B. T., Shaikh V,Jaware R.., Benefits of Using Nano-fluids in Minimum Quantity Lubrication (MQL)Turning of Steel, International Conference on Role of Industrial Engineering in Industry 4.0 Paradigm, organized by IIIE, Bhubaneshwar in association with SOA, (ICIEIND– 2018)
12 Rao M.V.B., Patil B. T., Shaikh V, Sustainability in Plastic World, Proceedings of the NCIHVPE2018, National Conference on “Integrating Human Values in Professional Education”, 12 th -13 th June, 2018, MGM’s College of Engineering & Technology, Kamothe, Navi Mumbai-410209
13 Singraur D.S., Patil B.T., Rampariya Y.T. (2020) Finite Element Analysis of Conformal Cooling for Reduction of Cycle Time to Enhance Performance in Plastic Injection Molding Process. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore doi:   https://doi.org/10.1007/978-981-32-99719_26    
14 Deepika Singh Singraour, Dr. Bhushan T. Patil, Yogesh Rampariya, Advancements in Thermoplastic Injection Molding System with Conformally Cooled Channels, International Conference on Role of Industrial Engineering in Industry 4.0 Paradigm, organized by IIIE, Bhubaneshwar in association with SOA, (ICIEIND– 2018)
15 Bhise D..K., Patil B. T., Shaikh V,., A Review of Micro Lubrication for Metal Working Process, International Conference on Role of Industrial Engineering in Industry 4.0 Paradigm, organized by IIIE, Bhubaneshwar in association with SOA, ICIEIND– 2018
16 Kamble Neeraj B., Rane A.B., Korgaonkar S., “Material study for designing portable helmet”, IJRET, June 2018, Vol. 07, Issue 05. DOI 10.15623 / IJRET. I.F. 3.935.
17 Mohite, R., Shaikh, V. A., (2019) “Analysing the effect of Minimum Quantity Lubrication (MQL) on Cutting Tool Wear during Turning using a Novel Two Nozzle Technique”, International Conference on Recent Trends in Mechanical Engineering (ICRTME-2019), January 2019, organized by A. P. Shah Institute of Technology under ICASTe-2019 “The Prism of Conferences”.
18 Sharma S., Singraur D. S., Sudhakar D. S.S., “Transient analysis of an injection mound with conformal cooling channels”, International Conference on Recent Advances in Mechanical Infrastructure (ICRAM-2019), (Accepted for presentation and publication in Lecture Notes in Intelligent Transportation and Infrastructure by Springer publications)
19 Rane, A. B., Sunnapwar, V. K., Sharma, M. R., & Jorapur, V. (2019). Development And Optimization Of Vehicle Assembly Line: A Literature Review. Journal Of Basic And Applied Research International, 38-52.
20 M. V. B. Rao, Bhushan Patil, Vasim Shaikh (2019) Comparative Evaluation of tool Wear, Chip Study and Machined Roughness characteristics in Turning of EN24 Steel in Dry condition, Water flooded and Bio Degradable Coconut Oil based Mist Cooling system at constant machining conditions, NCIETM, NITIE
21 M. V. B. Rao, Dr. Bhushan Patil (2018), Advances in Cyberphysical production system in Industry 4.0, International Conference on Role of Industrial Engineering in Industry 4.0 Paradigm
 
2017-18
1 Rao M.V.B., Patil B. T., Recent Trends in the Effective Utilization Of Minimum Quantity Lubrication (MQL) in Turning Low Carbon Steels, Industrial Engineering Journal, Feb 2018, Vol.XI, Issue No-2(pp 29-33), ISSN 0970-2555 (PRINT)
2 Dipali K Bhise, Bhushan T. Patil, Vasim A Shaikh., A Review of Semisolid Casting , International Conference on Manufacturing and Industrial Engineering – 2017 (ICMIE-2017), September 2017 Organized by Indian Institution of Industrial Engineering.
3 Rane A.B., Sakib, “Using GRBL Arduino based controller to run a 2 axis CNC machine”, Int. conf. on Smart City & Emerging technologies (ICSCET), Presented on 5-1-2018 at Universal COE, Vasai (E), Published in proceedings.
4 Rane A.B., Sakib, “Development of 3 axis CNC milling with an open source controller”, Vol.6, Issue 8, Aug 2017. DOI 10.15623 / IJRET. I.F. 3.935
5 Rane A.B., Sonawane A., “Elimination of proprietory control for 3 axis CNC milling machine”, IJRET, Aug.2017, Vol. 06, Issue 08, eISSN :2319-1169 pISSN : 2321-7308.
6 Rane A.B., Sunnapwar V.K., “Assembly line performance and modeling”, Journal of Industrial Engineering International, Vol.13, 2017, Issue no.3, pp.347-355., DOI 10.1007/s40092-017-0189-7, Springer, Original research Published online: 02 March 2017.
7 Rane A.B., Sunnapwar V.K., “Cost models for improved vehicle assembly line performance” Int. J. of Simulation and Process modelling, Vol. 12, Issue no. 2, 2017, pp 111-123, Inderscience publishers.
8 AtiqKudalkar, Sunil Kumar Das,Green Supply Chain Management: A step towards clean and green future, International Journal of Innovative Research in Science, Engineering and Technology, April 2017, Vol. 6, No- 4(pp 1111-1127) ISSN (Online): 2319-8753 ISSN (Print): 2347-6710, DOI:10.15680/IJIRSET.2017.0604001
9 Sunil Das,R. L. Shrivastava, Evaluation of Factors and Performance Measures: Service Quality of Hospital, International Journal of Creative Research Thoughts, 2017, Vol. 5, No. 4 (pp 2250 – 2254) ISSN: 2320-2882
10 Sunil Das, R. L. Shrivastava, Evaluation of Performance Measure Factors for Indian Healthcare Industry, International journal of Engineering Technologies and Management Research, Vol.4 (Iss11): November, 2017 ISSN: 2454-1907 DOI: 10.5281/zenodo.1117169
11 Sunil Das, R. L. Shrivastava, Identification of Success Factors and Performance Measures in healthcare, International Journal of Innovation in Engineering Research & Management, Volume :04 Issue 06 ISSN 2348-4918
 
2016-17
1 Vasim A shaikh et al."Microlubrication machining of 1018 steel:the effect of a biodegradable lubrication on the microstructural integrity"Lubrication science,2017,Wiley online library DOI:10.1002/Is 1373 (Web of Science)
2 Joshi K.N.,Patil B.T., (2016), “Review of Industrial Metrology using Machine Vision.”; International Journal of Emerging Technology and Advanced Engineering, ISSN:2250-2459,Vol.6,No6,pp 125-131
3 Deepika Singh Singraur & Bhushan Patil, “Review on Performance Enhancement of Plastic Injection Molding using Conformal Cooling Channels”, International Journal of Engineering Research and General Science, July-August, 2016 ISSN 2091-2730, Volume 4, Issue 4, July-August, 2016 (PP.176-180)
4 Narkhede, B.E., Mahajan, S.K., Patil, B.T. and Raut, R.D., 2016. Evaluating Factors Influencing Information Quality in Large Firms. , International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering,Vol.11,No.1 pp 30-37
5 Heeranand B. Vhangade , Bhushan T. Patil, Jaladhi Desai , Saurabh Baranwal (2017), “Design for Manufacturing Integration Ontologies and Analysis in Computer Aided Designing,”International Journal of Innovative Research in Science, Engineering and Technology, Vol.6,Issue 6,pp 11773-11779
6 Onkar V Potadar, Bhushan T Patil,(2016). “Development of Gear Measuring Model for Geometrical Measurement of Spur Gears”, Proceedings of First Int. Con. on Materials, Manufacturing and Design Engineering (iCMMD 2016),pp473-477
7 Tejashri Kulkarni,Ramchandra Anvekar,Kiran Wagale, Bhushan T Patil,(2016). “Change Management using OSS:Case Study of Job shop”, Proceedings of Int. Con. on Advanced and Agile Manufacturing nand Agile Software Development(ICAM-ASD2016),pp293-303.
8 Vedavyasrao S. Jorapur et al."A Promising Initial Population base genetic algorithms for job shop scheduling problem"Journal Of Software Enginering and application,ISSN Print 1945-3116,ISSN Online 1945-3124..
9 Arun Bhiva Rane et al., “Optimization of Vehicle Assembly Line”, 10th ISDSI International Conference, Nasik.
10 Arun Bhiva Rane et al., “Vendor selection by TOPSIS and Pugh Matrix-A case study” in National Convention of Indian Institute of Industrial Engineers, Nagpur, 2016/10.
11 D.S.S.Sudhakar “Automated storage system for kayak” International Research Journal of Engineering and Technology(IRJET):, Volume: 04 Issue: 04, pp 2436-2439,e ISSN: 23950056,April 2017.
12 D.S.S. Sudhakar “Vector Field Based Conversion of Color Image to Gray Scale” International Journal of Advanced Research in Computer and Communication Engineering,:2007 Certified Vol. 5, pp 159-161. Issue .10,October 2016
13 Sakib Shaukat Sarguroh,Arun B Rane, Saurabh A Korgaonkar,D S S Sudhakar “Elimination of proprietary control for computerized numerical control (CNC)machine” Journal of Basic and Applied Research International, Journal of Basic and Applied Research International

 

2015-16
1 Shinde R.A., Patil B.T.,Joshi K.N., “Optimization of Tube Hydroforming Process (without Axial feed)by using FEA Simulations”,3rd International Conference on Innovations in Automation and Mechatronics Engineering,ICIAME 2016 organized by G H Patel College of Engineering & Technology, VallabhVidyanagar 388120, Gujarat-India (Published in Elsevier Procedia Technology)
2 Prashant Jadhav ,A.B.Rane ,D.S.S.Sudhakar “Analysis of Burner for Biogas By Computational Fluid Dynamics and Optimization of Design by Genetic Algorithm” at the ‘4th International conferences on Advances in Computer, Communication, and Control, ‘03-04 ICAC4’ 15.
3 A.B.Rane ,Dr. V.K.Sunnapwar ,Dr. S.B.Rane “Strategies to overcome the HR barriers in successful lean implementation” Int. J. of Procurement Management, Published Inderscience publishers,Jan 2015.
4 A.B.Rane, Dr. V.K.Sunnapwar , D.S.S.Sudhakar” Regression modeling for performance improvement of Assembly line” Journal of Basic and applied research international”, Published, International Knowledge Press, May 2015
5 A.B.Rane , Dr. V.K.Sunnapwar , Dr. S.M.Khot, Dr. Ramesh Vulavala “Mathematical modeling of Vehicle assembly line Int. J. of Simulation and Process modelling, Inderscience publishers”,Deceber 2015.
6 A.B.Rane , Dr. V.K.Sunnapwar Dr. S.M.Khot,”Importance of VSM in Lean mfg : A case study Int. conf. “on IE (ICIE 2015) IIIE & ICIE 2015 at SVNIT, Surat , ICIE 2015 – P -177,Published in proceedings ,September 2015.
7 A.B.Rane , Dr. V.K.Sunnapwar , Dr. N. Chari, M.Sharma, V.Jorapur “Improving performance of Lock assembly line using lean and simulation approach International Journal of Business Performance Management (IJBPM)”, Inderscience publishers,Jan 2016.
8 AkshaySarda, Arun.B.Rane,” Simulation of a Vehicle Assembly Line using ARENA “,Int. conf. on IE (ICIE 2015) IIIE & ICIE 2015 at SVNIT, Surat, ICIE2015-P-74 Published in proceedings, Sep 2015.
9 Stephen Joseph K, Ragini Joshi, Pratiksha Gangawane, Sana Kanvinde, D.S.S.Sudhakar"Development of JOLIS GC3000 Gas Cutter Joint Ordinate Linear Interpolation System CNC Machine" Proceedings of the World Congress on Engineering and Computer Science 2015 Vol I October 21-23, 2015, San Francisco, USA.
10 D S S Sudhakar, "Performance Optimization of shell and tube heat exchanger by CFD,International Conferance on emerging trends in Engineering Technology Mumbai 2016.
11 Priya B. Vhangade, D.S.S. Sudhakar, Rajeev A. Solanki, Basappa U. Vhangade "Comparative study of the effect of dwelling the punch at the BDC VS without dwelling at the BDC on the deep drawing process by FE Simulation "IJMET, Volume 7, Issue 3, May –June 2016 , pp.249–266, Article ID: IJMET_07_03_023
12 Shital Dharmul , D.S.S. Sudhakar,"Study of Heating Process in Condenser of Thermokinetic Desorpter " International Journal of Scientific Engineering and Research,Volume 4,Issue 2,Feb 2016.
13 Vedavyasrao S Jorapur, Vinod S Puranik, Anand S Deshpande, Mahesh Sharma "A promising initial population based genetic algorithm for job shop scheduling problem" Journal of Software Engineering and Applications, Scientific Research Publishing,Volume 9,Pg-208,May 2016.

 

2014-15
1 AdityaDarekar, T.S.Venkatesh , BhushanPatil , Yazad Doctor," Review of optimization aspects for plastic injection molding process", IRACST- Engg Science & Technology , An International Journal [ESTIJ],1 Feb 2015, ISSN 2250-3498 Vol.5 .
2 Dipali K.Bhise, D.S.S.Sudhakar, HitendraB.Vaishnav,“ Analysis of CH10sm airfoil using computational fluid dynamics”, International conference on Advances in Computer, Communication, and Control 2003-04, ICAC4’15.
3 Hitendra B. Vaishnav, D.S.S.Sudhakar, Dipai k.Bhise, “Effect of Front wing on racing car”, International conference on Advances in Computer, Communication, and Control 2003-04, ICAC4’15.
4 Prasad Kawade, B.S.Ajit Kumar, KashyapAnandpara, D.S.S.Sudhakar, “Computer Aided Design and Analysis of Volatile separating device” ICAC3’15 procedia computer science 00(2014) 000-000.
5 N.Akshayata.C, Aravind Kumar, D.S.S.Sudhakar, “Computer aided process planning in job shop environment”, International conference on Advances in Computer, Communication, and Control 2003-04, ICAC4’15.
6 Jorapur V.S,"Research issues in bottlenecks in discrete manufacturing systems",IJERT-2012, 2015,Elsevier publications – Computers in Industry vp; 70.
7 Jorapur V.S,"Comparative study different representations in genetic algorithms for job shop scheduling",Journal of software engineering and applications,2014 ,vol 9.
8 JorapurV.S,"Analysis of discrete manufacturing system of transmission shafts and gears for its optimum performance".
9 Vijay S. Bilolikar,YogeshGadinaik, “ Simulation based analysis of job shop manufacturing planning”, Annual conference of production and operations management society (POMS), ,May 2015,Washington DC, USA.
10 Vijay S Bilolikar & Karuna Jain , ‘An Adaptive Crossover Genetic Algorithm for Multi-mode RCPSP with Discounted Cash Flows 26th Annual conference of Production and Operations Management Society (POMS), held at Washington DC, USA on May 8th -11th, 2015,.
11 A.B.Rane, “Literature review of development and optimization of vehicle assembly line” ,Open Journal of Optimization (OJOp), ,Nov 2014.,Scientific Research Publishing.
12 A B Rane,“Simulation based case study to improve the performance of an Assembly line” ISDSI International Conference, , January 2015,Pune, India.
13 A B Rane, “Improving the performance of assembly line: Review with case study” International conference on Nascent Technologies in the Engineering Field,2015.
14 A B Rane,“Regression modeling for performance improvement of Assembly line” International conference on Advances in Computer, Communication, and Control 2003-04, ICAC4’15.
15 A B Rane, “Analysis of burner for biogas by computational fluid dynamics and optimization of design by GA” International conference on Advances in Computer, Communication, and Control 2003-04, ICAC4’15.
16 A B Rane, “DES based lean manufacturing implementation in bearing industry” at National conference on Industrial Engg. and Tech. Management, NCIETM-2014, October , 2014.
17 A B Rane,“Strategies to overcome the HR barriers in successful lean implementation” International journal of Procurement Management, Inderscience Publishers, April 2015.
18 A B Rane, “ Simulation of manufactuirng systems” at International conference on eco-friendly Technology for sustainable growth ICEFT-2014,, March 2014, pp 41-46.
19 M.VeeraBhadraRao,“ Low cost Automation”, LalaLajpathrai Institute of Management Studies , March 2015,Mahalaxmi.
20 Manoj J. Ghag,M.VeeraBhadraRao, “Review of optimization techniques such as DOE and GRA used for process parameters of Resistance spot welding”, (IJSR) ISSN:2319-7064, Volume 4, 6, June 2015, Paper ID:SUB155288, pp 701-705.
21 Manoj J. Ghag, M.VeeraBhadraRao, “Optimization of process parameters in resistance spot welding of IS410:2006 grade CuZn40 brass material using Taguchi method”, (IJSER) ISSN:2347-3878, Volume 3, Issue 6, June 2015, Paper ID:IJSER15273, pp 92-97.
22 Imran A. Shaikhand, M.VeeraBhadraRao, “A Review on Optimization process parameters for TIG welding using Taguchi method & Grey Relational Analysis”, (IJSR) ISSN:2319-7064, Volume 4, 6, June 2015, Paper ID:SUB155855, pp 2449-2452.

 

X

Right Click

No right click